Moszi NET - WL500gp automount

- bits & pieces about software development

http://www.wl500g.info/showthread.php?t=15575

Since the existing automounter supports only hard disks to be mounted - i needed a solution for automatically mounting cd filesystems. So the solution is to cross compile automount and to include autofs4 & /proc support into the kernel. If you want to try it follow these steps: 0. download these files: http://www.moszi.net/dev/automount/automount.tar.gz 1. insmod autofs4.o 2. ln -s /proc/mounts /etc/mtab (this will only work if you recompiled your kernel with /proc support) 3. copy the necessary files to their places 4. edit your /opt/etc/auto.misc file 5. start /opt/etc/init/S97autofs Enjoy

add link

microsoft.com WindowsClient.Net Mike Taulty Asus wl500g custom firmware

The last comments:Afonso says:I'm trying to make a raid1 on the asus 500gp and I've saw your thread. But I cannot find the md.o and the raid1.o on modules.tar.gz file you attached. I also have a linux noobie question here should I put the files to make the insmod command see themmike says:Good videosmoszidev says:Venemo: it is at System.Web.Configuration.HttpConfigurationSystem.UseHttpConfigurationSystem moszidev says:dumb, ... no wonder your name is dumb :) ... i more or less expected these type of answers :) - trust me, i know the double locking design pattern :) ... but it seems that you don't really know for what the locking is needed ;) ...dumb says:this is called double locking: http://en.wikipedia.org/wiki/Double_checked_locking_patternVenemo says:Where did you find this in the framework?moszidev says:just found out that the maximum transfer rate on USB or UTP for this router is 3.5MBytes/sec. (that is 28MBit / sec)[br] So if you have a connection speed higher than this, it will not be fully used for sure.

{ This website uses MosziNet Persistence Manager and MosziNet Blog Control. }